CHANGELOG for IPv6 Ready Logo Phase-2 IPsec Conformance Test Package 2008/12/09 Release 1.9.0 Official release 2008/10/28 Release 1.9.0b1 Pre-release for the public review 2008/10/27 Yukiyo Akisada M INSTALL.ct M ipsec.p2/INDEX_P2_HOST M ipsec.p2/INDEX_P2_HOST_TCP M ipsec.p2/INDEX_P2_HOST_UDP M ipsec.p2/INDEX_P2_SGW M ipsec.p2/INDEX_P2_SGW_UDP M ipsec.p2/IPSEC.pm M ipsec.p2/keys.def M ipsec.p2/keys.pl M ipsec.p2/p2_ALGO_common.def M ipsec.p2/p2_HTR_E_Common.seq M ipsec.p2/p2_HTR_E_TCP_Common.seq M ipsec.p2/p2_SGW_E_Common.seq M ipsec.p2/p2_ipsec_config - support RFC 4312 (The Camellia Cipher Algorithm and Its Use With IPsec) - fix typo - contributed by NTT 2008/01/30 Yukiyo Akisada M INSTALL.ct M ipsec.p2/IPSEC.pm M ipsec.p2/p2_ipsec_config - remove the key ESN_SUPPORT 2007/10/15 Release 1.1.2 Official release 2007/10/11 Yukiyo Akisada Remove tests: ipsec.p2/INDEX_P2_HOST, INDEX_P2_HOST_TCP, INDEX_P2_HOST_UDP, INDEX_P2_SGW, INDEX_P2_SGW_UDP, p2_HTR_E_ICV_ESN.seq, p2_SGW_E_ICV_ESN.seq - remove ESN test cases because ESN configuration always requires to use IKEv2 2007/08/31 Release 1.1.1 Official release 2007/08/31 Yukiyo Akisada Bug fix: ipsec.p2/p2_HTR_E_SelectSPD_ICMP_Type.seq p2_SGW_E_SelectSPD_ICMP_Type.seq - change to require SAD/SPD mapping as following Implementation Guidance at section 4.4.2. in RFC 4301. 2007/04/27 Release 1.1.0 Official release 2007/03/16 Release 1.1.0b1 Beta release for "dry run" 2007/03/14 Yukiyo Akisada New tests: - Select SPD (ICMP Type) - Receipt of No Next Header - TFC Padding - ICV calculation (ESN) - Encryption Algorithm: AES-CTR Remove tests: - Authentication Algorithm: HMAC-MD5 - Encryption Algorithm: DES-CBC 2005/12/26 Release 1.0.7 Bugfix release - test tool bugs are fixed. 2005/12/22 Nobumichi Ozoe ipsec.p2/INDEX_P2_SGW, INDEX_P2_SGW_UDP - modified test number corresponding to test specification. 2005/12/22 Mitsuru Chinen, Kazunori Miyazawa ipsec.p2/p2_SGW_E_PacketTooBigForwarding.seq - modified expected MTU value of ICMP error message 2005/11/17 Release 1.0.6 Bugfix release - test tool bugs are fixed. 2005/10/26 Mitsuru Chinen ipsec.p2/p2_HTR_Reset.seq - use not system() but copy() 2005/10/6 Nobumichi Ozoe ipsec.p2/p2_HTR_E_Bypass.seq, p2_HTR_E_Discard.seq, p2_HTR_E_TCP_Bypass.seq, p2_HTR_E_TCP_Discard.seq p2_SGW_E_Bypass.seq, p2_SGW_E_Discard.seq - modified SPD keyward from "::" to "any" 2005/10/2 Nobumichi Ozoe ipsec.p2/IPSEC.pm - modified function of reseting NUT's MTU - modified function of receiving NS for SGW test case 2005/9/27 Release 1.0.5 Official release - The tool is updated according to the change of the test specification. 2005/9/20 Nobumichi Ozoe ipsec.p2/p2_SGW_E_PacketTooBigTransmission.seq - modified the maximum MTU value of ICMP error message 2005/7/22 Release 1.0.4 Official release - test tool supports AES-XCBC-MAC 2005/7/04 Release 1.0.3 Bugfix release - test tool bugs are fixed. 2005/7/04 Nobumichi Ozoe ipsec.p2/IPSEC.pm - modified return code check - added one more Router Solicitation (RS) packet as expected frame in waiting RS function. - default reboot and address assign time was shortened. ipsec.p2/p2_HTR_common.def p2_SGW_common.def - added packet define of Router Solicitation ipsec.p2/p2_HTR_E_PacketTooBigReception.seq - modified return code check 2005/6/22 Release 1.0.2 Official release 2005/6/22 Nobumichi Ozoe ipsec.p2/INDEX_P2_SGW, INDEX_P2_SGW_UDP - deleted p2_SGW_E_PacketTooBigForwardingKnown.seq from test item - its test name is Packet Too Big Forwarding Known Original Host. ipsec.p2/IPSEC.pm, p2_HTR_Reset.seq - When MANUAL_ADDR_CONF=yes is configured and NUT is rebooted, now it executes the address assign and default route configuration. - If TN received NS probing neighbor from NUT, TN sends NA to NUT. 2005/5/12 Release 1.0.1 Bugfix release - test tool bugs are fixed. 2005/5/12 Nobumichi Ozoe ipsec.p2/IPSEC.pm - define default vaule of wait time after rebooting - modify the function of address assignment ipsec.p2/p2_HTR_Reset.seq ipsec.p2/p2_SGW_Reset.seq - theses test are ignored, because it are only used for initialization of NUT. ipsec.p2/p2_HTR_E_TCP_invalidICV.seq - modify the port of NUT is changeable 2005/5/09 Nobumichi Ozoe ipsec.p2/INSTALL.ct - more detailed explanation ipsec.p2/INDEX_P2_HOST, INDEX_P2_HOST_TCP, INDEX_P2_HOST_UDP, INDEX_P2_SGW, INDEX_P2_SGW_UDP - using keyword 'null' as ESP NULL encryption algorithm ipsec.p2/Makefile, Makefile.test - using keyword 'ipv6ready_p2_end_node' to start test for IPsec End-Node ipsec.p2/p2_HTR_E_Common.seq, p2_SGW_E_Common.seq, keys.def, keys.pl - using keyword 'null' as ESP NULL encryption algorithm - correct some displayed messsage ipsec.p2/p2_HTR_E_PacketTooBigReception.seq p2_SGW_E_PacketTooBigForwarding.seq p2_SGW_E_PacketTooBigForwardingKnown.seq p2_SGW_E_PacketTooBigTransmission.seq p2_ipsec_config IPSEC.pm - modify the method to reset MTU of NUT 2005/01/11 Yukiyo Akisada Makefile.inc - define V6EVALROOT variable 2005/4/29 Release 1.0 1st official release [end of CHANGELOG]